THREAD PROFILE

Made of high-speed steel and are manufactured under tolerances indicated by each norm. Are used during the machining of the thread to check the correspondence between it and the standard shape. They can also be used to identify quickly the type of thread in the pipes. If used against the light on a thread they can give an approximate idea whether the thread is in accordance to the standards in lead, tape and height measures. Other models available upon customer request.

CODECONNECTION
300PVR270RSC  2 3/8″ - 3 1/2″ P.A.C CONNECTION 1.5″ TPF  4 TPI     V-0.076
300PVR038CASING, TUBING & DRILL PIPE  3/4″ TPF  8 TPI  INT & EXT
300PVR120CASING, TUBING   3/4″ TPF    10 TPI  INT & EXT
300PVR050LP  3/4″ TPF  8 TPI  INT & EXT
300PVR250LP  3/4″ TPF  11.5 TPI  INT & EXT
300PVR200BUTTRESS 4 1/2″ - 13 3/8″     3/4″ TPF  5 TPI  INT
300PVR300BUTTRESS 4 1/2″ - 13 3/8″   3/4″ TPF  5 TPI  EXT
300PVR310RSC NC #56 - #84   3″ TPF  4 TPI     V-0.038R
300PVR210BUTTRESS 16″ - 20″   1″ TPF  5 TPI  INT
300PVR220BUTTRESS 16″ - 20″   1″ TPF  5 TPI    EXT
300PVR021RSC  2 3/8″- 4 1/2″ REG   2 7/8″ - 4 1/2″ FH   3″ TPF 5 TPI  V-0.040
300PVR090RSC  6 5/8″ REG     5 1/2″ & 6 5/8″ FH   2″ TPF 4 TPI  V-0.050
300PVR110RSC  5 1/2″, 7 5/8″ & 8 5/8″ REG   3″ TPF 4 TPI   V-0.050
300PVR190RSC  2 3/8″ - 6 5/8” IF     NC #23 - #50   2″ TPF 4 TPI   V-0.038R
300PVR070RSC  7″ & 8 5/8″  HUGHES H-90   3″ TPF  3.5 TPI     90-V-0.050
300PVR140RSC  2 3/8″ – 3 1/2″ SLIMLINE H-90   1.25″ TPF  3 TPI    90-V-0.084
300PVR390RSC HUGHES H-90 3 1/2″ – 6 5/8″ 2” TPF 3.5 TPI 90-V-0.050
300PVR520RSC REG  1″ & 1 1/2″ / NC #10 – #16  1 ½” TPF  6 TPI    V-0.055
300PVR380RSC  2” TPF  4 TPI     V-0.065
300PVR5103/4" TPF  3.5 TPI
Visualization 360º

Drag the cursor horizontally to view 360º

Contact

Send us a message and we will contact you shortly.

Powered by goBat