EXTERNAL PITCH DIAMETER GAGE

Inspects external pitch diameter. RSC threads need setting standard and location template to be set to zero. The location template is used to detect the correct thread where the contact point must be placed to carry out the measurement.

CODERANGEDIALCONNECTION
200MDE600-10” - 6”.0005″ / .5″ / 0 - 25 - 0STRAIGHT THREADS "V" & ACME
200MDE600-20” - 6”.0001″ / .5″ / 0 - 5 - 0STRAIGHT THREADS "V" & ACME
200MDE1200-16” - 12”.0005″ / .5″ / 0 - 25 - 0STRAIGHT THREADS "V" & ACME
200MDE1200-26” - 12”.0001″ / .5″ / 0 - 5 - 0STRAIGHT THREADS "V" & ACME
200MDE1600-112” - 16”.0005″ / .5″ / 0 - 25 - 0STRAIGHT THREADS "V" & ACME
200MDE1600-212” - 16”.0001″ / .5″ / 0 - 5 - 0STRAIGHT THREADS "V" & ACME
200MDE2000-116” - 20”.0005″ / .5″ / 0 - 25 - 0STRAIGHT THREADS "V" & ACME
200MDE2000-216” - 20”.0001″ / .5″ / 0 - 5 - 0STRAIGHT THREADS "V" & ACME
200MDE2400-120” - 24”.0005″ / .5″ / 0 - 25 - 0STRAIGHT THREADS "V" & ACME
200MDE2400-220” - 24”.0001″ / .5″ / 0 - 5 - 0STRAIGHT THREADS "V" & ACME
200MDE600-RSC0” - 6”.01 MM / 12.7 MMTAPERED THREADS - RSC
200MDE1200-RSC6” - 12”.01 MM / 12.7 MMTAPERED THREADS - RSC

LOCATION TEMPLATES

CODEDETAIL
300PLE0101.5” TPF 4 TPI V-0.076
300PLE0202” TPF 4 TPI V-0.038R
300PLE0302” TPF 4 TPI V-0.050
300PLE0403” TPF 4 TPI V-0.038
300PLE0503” TPF 4 TPI V-0.050
300PLE0603” TPF 5 TPI V-0.040
Visualization 360º (ANALÓGICO)

Drag the cursor horizontally to view 360º

Visualization 360º (DIGITAL)

Drag the cursor horizontally to view 360º

Contact

Send us a message and we will contact you shortly.

Powered by goBat